Instruction Spc-B: Removal Of Daughter Pcb; Instruction Spc-C: Removal Of The Main Pcb - Nanoptix SPILL PROOF Service Manual

Instruction SPC-B: Removal of Daughter PCB

1. Remove four (4) screws as shown
2. Then slide board out to remove

Instruction SPC-C: Removal of the main PCB

1. Remove top shell by following Instruction A
2. Remove daughter PCB by following instruction B
3. Refer to Error! Reference source not found. and Figure 20 to remove all connections
4. Remove two (2) screws using tool 2, list up to remove
Document # 720003-0000
December 2015
Figure 29
Figure 29: PCB mounting plate - SPC
SPILL PROOF / SPILL PROOF CUTS
using tool 1&2.
Service Manual
37