Figure 20: Pcb Removal (A); Figure 21: Pcb Removal (B) - Nanoptix PayCheck Slim Service Manual

Instruction B: Removal of the main controller PCB
1. Remove the printing mechanism kit by following Instruction A
2. Remove PCB mounting Philips screw
3. Remove the two serial port nuts
4. Squeeze the three plastic holders one by one, and gently push the serial port down,
freeing the PCB
Document # 720006-0000
August, 2011

Figure 20: PCB Removal (A)

Figure 21: PCB Removal (B)

Service Manual
28