4 Media and Supplies Guide
Thermal Paper Specifications
The printer requires qualified thermal paper with the following dimensions:
Spill Proof Printer
Width
80 mm ± .2 mm (3.15 in. ± .008 in.)
82.5 mm ± .2 mm (3.25 in. ± .008 in.)
Spill Proof Cuts Printer
Width
80 mm ± .2 mm (3.15 in. ± .008 in.)
82.5 mm ± .2 mm (3.25 in. ± .008 in.)
Note: The paper should not be attached to the core.
Document # 720003-0000
December 2015
Diameter
115 mm max. (4.5 in.)
115 mm max. (4.5 in.)
Table 15: Paper specs - SP
Diameter
125 mm max. (5 in.)
125 mm max. (5 in.)
Table 16: Paper specs - SPC
SPILL PROOF / SPILL PROOF CUTS
Outside Core Diameter
45mm (1.75 inches)
45mm (1.75 inches)
Outside Core Diameter
45mm (1.75 inches)
45mm (1.75 inches)
Service Manual
28