Printer Cleaning Instructions - Nanoptix SPILL PROOF Service Manual

7 Printer Cleaning Instructions

Note: Under normal operating conditions, the minimum interval for cleaning the NANOPTIX
SPILL PROOF & SPILL PROOF CUTS printer is 3 months or 5 km of paper printed,
whichever comes first. Isopropyl alcohol cleaning pens and pre-saturated cleaning cards are
available form Nanoptix.
Step 1: Open printer door and wipe off or vacuum the accumulated dust
Document # 720003-0000
December 2015
Figure 30: Main PCB – SPC
Spill Proof
Figure 31: Remove dust
SPILL PROOF / SPILL PROOF CUTS
Spill Proof Cuts
Service Manual
38