Spare Parts Replacement Instructions; Spill Proof; Instruction Sp-A: Removal Of The Top Shell; Table 18: Power Supplies And Cords Table 19: Communication Cables Part Numbers Table 20: Tools Required - Sp - Nanoptix SPILL PROOF Service Manual

6 Spare parts replacement instructions

Note: Follow instructions below for disassembly of defective parts. Follow instructions in the
reverse order for reassembly.
Use ESD protection (such as a wrist strap)

Spill Proof

Tools required:

Instruction SP-A: Removal of the top shell

1. Remove screw as shown in Figure 24 using tool 2
2. Then turn printer back on its feet, open cover and pull up on top shell to remove
Document # 720003-0000
December 2015
anytime a PCB is exposed
REFERENCE
SOCKET HEAD
TOOL 1
SCREWDIRVER. # 3/16 (5.5mm)
TOOL 2 SCREWDRIVER, PHILIPS #1
Table 19: Tools Required – SP
Figure 24 Top shell - SP
SPILL PROOF / SPILL PROOF CUTS
DESCRIPTION
Service Manual
33