4 Spare parts replacement instructions
Use ESD protection (such as a wrist strap)
Instruction A: Removal of printer from mounting bracket
1. Pull printer forward until resistance is felt, then move green lever all the way to the left
2. Pull printer further forward to separate from mounting bracket
Instruction B: Removal of jam proof module
1. Remove 2 screws to remove the outer jam proof module
2. Remove 6 screws to remove the iner jam proof module
Document # 720009-0000
October 18, 2017
anytime a PCB is exposed
Figure 24: printer mount
Figure 25: Jam Proof module
Technicians Manual
23