Leuze
electronic
Environmental data
Ambient temp.
(operation/storage)
Air humidity
Vibration
Shock
Electromagnetic compatibility EN 61326-1,
Additional Functions
autoReflAct
Table 4.1:
Notice!
The warm-up time before devices with integrated heating are ready for operation is approx.
30min. (depending on the environmental conditions).
4.2
LED indicators
MS 34 103 / MS 34 105
On top of the modular hood with integrated connectors a red/green status LED is located
between the M12 connectors DP IN and DP Out. It indicates the state of the Profibus
connection.
State
off
green flashing
green, continuous light
red, flashing
red, continuous light
orange, continuous light
Table 4.2:
1)
Note: The LED remains off until the BCL 34 is recognised by the Profibus. Only after the
Profibus has addressed the BCL 34 for the first time do the following status descriptions
apply.
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
without heating: 0°C ... +40°C/-20°C ... +60°C
with heating:
max. 90% rel. humidity, non-condensing
IEC 60068-2-6, test FC
IEC 60068-2-27, test Ea
IEC 61000-4-2, -3, -4 and -6,
automatic reading activation via reflector
General Specifications
Meaning
voltage off or device not yet recognised by the Profibus
initialisation of the device, establishment of the Profibus communication
data operation
error on the Profibus, error can be resolved by a reset
error on the Profibus, error cannot be resolved by a reset
SERVICE operation active
LED states MS 34 103 / MS 34 105
BCL 34
-35°C ... +30°C/-20°C ... +60°C
Specifications
1)
13