Led Status Indicators - Leuze electronic BCL558i Technical Description

Status display of the USB interface
USB The BCL
MS An external parameter memory is properly connected to the USB interface of the
BCL 558i.
Read result
The read bar code information is displayed.
EtherNet/IP status
ENIP EtherNet/IP interface is activated.
8.2.2

LED status indicators

PWR LED
off
flashes green
green continuous light Device ok
orange continuous light Service mode
flashes red
red continuous light
Leuze electronic
558i is connected to a PC via the USB interface.
Device OFF
- no supply voltage
Device ok, initialization phase
- no bar code reading possible
- voltage connected
- self test running
- initialization running
- bar code reading possible
- self test successfully finished
- device monitoring active
- bar code reading possible
- configuration via the USB service interface
- configuration via the display
- no data on the host interface
Device ok, warning set
- bar code reading possible
- temporary operating fault
Device error / parameter enable
- no bar code reading possible
BCL 558i 87