Raven AutoBoom Installation Manual page 15

Orifice Fitting Removed from the AutoBoom Valve
FIGURE 4.
Remove the orifice fittings from Ports 3A and 3B.
4.
Important: Tip the AutoBoom valve on its side and use the Allen wrench to remove the
orifice from the cavity, taking care not to let the fitting fall into the valve.
Port Plug Reinstalled on the AutoBoom Valve
FIGURE 5.
Use the Allen wrench to reinstall the port plugs on Ports 3A and 3B of the AutoBoom valve.
5.
Coil Reinstalled on the AutoBoom Valve
FIGURE 6.
Reinstall the coils on the solenoids of the AutoBoom valve.
6.
Manual No. 016-0230-050
PowerGlide Plus
Orifice Fitting
Removed - Keep for
Future Use
11