Headlight Beam Adjustment; Engine Oil - Suzuki RV125K3 Setup Manual

ENGINE OIL VISCOSITY RATING SELECTION CHART
TABLEAU DE SELECTIONS DE VISCOSITE D'HUILE MOTEUR
TABELLE FÜR MOTORÖLVISKOSITÄTSWAHL

ENGINE OIL

HUILE MOTEUR
MOTORÖL
TEMP.

HEADLIGHT BEAM ADJUSTMENT

The headlight beam can be adjusted both horizontally
and vertically if necessary.
To adjust the beam horizontally:
Turn the adjuster A clockwise or counterclockwise.
To adjust the beam vertically:
Turn the adjuster B clockwise or counterclockwise.
ENGINE OIL
This motorcycle is shipped from factory with
the engine filled with engine oil. Be sure to
check oil level.
Check the engine oil level through the engine oil
inspection window with the motorcycle held vertically
on level ground. Start the engine and allow it to run
for a few minutes at idling speed. Turn off the engine
and wait about three minutes, then check the oil level
through the inspection window. If the level is below
the "L" mark, add oil to "F" level. If the level is above
the "F" mark, drain oil to "F" level.
Replace the drain plug and engine oil filler plug.
Tighten them securely.
A: Engine oil filler plug
B: Engine oil level inspection window
NOTE:
Use a premium quality 4-stroke motor oil to
ensure longer service life of your motorcycle.
Use only oils which are rated SF or SG under
the API service classification. The recom-
mended viscosity is SAE 10W-40. If an SAE
10W-40 motor oil is not available, select alter-
native according to the left chart.
Test ride the motorcycle checking all mechanical
functions. Tighten all nuts, bolts, and miscellaneous
mounting parts to the proper torque specs. Confirm
that all cables and wiring harnesses are connected
and routed correctly.
43