Rear Suspension; Tire Pressure; Headlight Beam Adjustment - Suzuki SVF650K9 Setup Manual

LEFT
7
6
5
4
3
2
1 1
RIGHT

REAR SUSPENSION

Checking spring setting
Make sure the spring setting of the rear suspension is
correct.
The standard setting of this motorcycle is as indicated
in the table below.
Standard setting
A: Adjuster

TIRE PRESSURE

Using an accurate air gauge, check the air pressure of
the front and rear tires.
The pressure should be as indicated in the table
below.
COLD INFLATION TIRE PRESSURE
SOLO RIDING
225 kPa
FRONT 2.25 kgf/cm
33 psi
250 kPa
REAR 2.50 kgf/cm
36 psi

HEADLIGHT BEAM ADJUSTMENT

The headlight beam can be adjusted both horizontally
and vertically if necessary.
To adjust the beam vertically:
Turn the adjuster A clockwise or counterclockwise.
To adjust the beam horizontally:
Turn the adjuster B clockwise or counterclockwise.
A: Adjuster (Vertically)
B: Adjuster (Horizontally)
23
Position 3
DUAL RIDING
225 kPa
2.25 kgf/cm
2 2
33 psi
250 kPa
2.50 kgf/cm
2 2
36 psi