Danfoss VLT Series Design Manual page 85

VLT ® HVAC Drive Design Guide
4. How to Order
4.1. Ordering form
4.1.1. Drive Configurator
It is possible to design a adjustable frequency drive according to the application requirements by
using the ordering number system.
For the VLT HVAC Drive, you can order both standard drives and drives with integral options by
sending a type code string describing the product to your local Danfoss sales office:
FC-102P18KT4E21H1XGCXXXSXXXXAGBKCXXXXDX
The meaning of the characters in the string can be located in the pages containing the ordering
numbers in the chapter
option and a general purpose I/O option is included in the drive.
Ordering numbers for VLT HVAC Drive standard variants can also be located in the chapter
to Select Your VLT
Use the Internet-based drive configurator to configure the right drive for the right application and
generate the type code string. The drive configurator will automatically generate an eight-digit
sales number to be delivered to your local sales office.
Furthermore, you can establish a project list with several products and send it to a Danfoss sales
representative.
The drive configurator can be found on the Danfoss homepage:
How to Select Your VLT
.
MG.11.B4.22 - VLT ® is a registered Danfoss trademark.
. In the example above, a Profibus LON works
www.danfoss.com/drives
4. How to Order
4
How
.
85