Web Configuration; Configuration Connection; Accessing The Configuration Web Page - Planet ICG-2510W-LTE Series User Manual

4. WEB CONFIGURATION

This chapter describes how to configure and manage the cellular gateway

4.1. Configuration Connection

Before configuration, you should connect the cellular gateway and your configuration PC with the supplied network
cable. Plug the cable's one end into the Local Network port of the cellular gateway, and another end into your configure
PC's Ethernet port. The connection diagram is as follows:
Please modify the IP address of PC to the same network segment address of the router, for instance, 192.168.1.9.
Modify the mask code of PC to 255.255.255.0 and set the default gateway of PC as the router's IP address
(192.168.1.1).

4.2. Accessing the Configuration Web Page

The chapter is to present main functions of each page. Users visit page tool via web browser after connecting user PC
to the cellular gateway. There are eleven main pages: Setting, Wireless, Service, VPN, Security, Access Restrictions,
NAT, QoS Setting, Applications, Management and Status. Users enable to browse slave pages by clicking one main
page.
Users can open IE or others and enter the cellular gateway's default IP address of 192.168.1.1 on address bar, then
click on "Enter" to go to the Web management tool of the cellular gateway. Log in to the web page with the first user
name, and it will display a page asking you to modify the default user name and password of the cellular gateway.
Users have to click "change password" to make it work if they want to modify user name and password.
31