Object –Packet
Filter
Enable Packet
Filter
Policy
Add Filter Rule
Direction
Protocol
Source Ports
Destination
Ports
Source IP
Destination IP
4.3.7. NAT
Description
Enable or disable "packet filter" function
Two policies are provided. One is Discard packets conform to the
following rules and the other is Accept only the data packets conform to
the following rules.
Input: packet from WAN to LAN
Output: packet from LAN to WAN
Packet protocol type
Packet's source port
Packet's destination port
Packet's source IP address
Packet's destination IP address
"Source Port"," Destination Port" ,"Source IP" ,"Destination IP" could not be all empty.
82