Table of Contents
Advertisement
Object –Serial
Applications
Baudrate
Databit
Stopbit
Parity
Flow control
Protocol
Server Address
Server Port
Device ID
Device Number
Heartbeat
Interval
TCP Server
Listen Port
Custom
Heartbeat Packet
Custom
Registration
Packet
4.3.10.
Admin
Description
Baud rate indicates the number of bytes per second transported by
device, commonly used baud rate is115200, 57600, 38400, and 19200.
The data bits can be 4, 5, 6, 7, 8, constitute a character. The ASCII code
is usually used. Starting from the most significant bit is transmitted.
It marks the end of a character data. It is a high level of 1, 1.5, and 2.
Use a set of data to check the data error.
Including the hardware part and software part in two ways.
The protocol type for transmitting data.
UDP (DTU): Data transmission in UDP protocol works as an IP MODEM
device which has application protocol.
Pure UDP: Data transmission in standard UDP protocol.
TCP (DTU): Data transmission with TCP protocol works as an IP
MODEM device which has application protocol.
Pure TCP: Data transmission in standard TCP protocol, Router is the
client.
TCP Server: Data transmission in standard TCP protocol, Router is the
server.
TCST: Data transmission in TCP protocol that uses a custom data
The data service center's IP Address or domain name.
The data service center's listening port.
The Router's identity ID.
The Router's phone number.
The time interval to send heart beat packet. This item is valid only when
you choose UDP (DTU) or TCP (DTU) protocol type.
This item is valid when Protocol Type is "TCP Server".
This item is valid when Protocol Type is "TCST".
This item is valid when Protocol Type is "TCST".
87
Advertisement
Table of Contents
