Led Indications - Planet ICG-2510W-LTE Series User Manual


Reset Button
On the front of the ICG-2510W(G)-LTE series, the reset button is designed to reboot the Industrial Cellular Gateway
without turning off and on the power. The following is the summary table of the reset button functions:
Figure 2-3 Rest Button of ICG-2510W(G)-LTE Series
Reset Button Pressed and Released
> 15 sec: Factory Default

2.1.2. LED Indications

The front panel LEDs indicate instant status of port links, data activity and system power; it helps monitor and
troubleshoot when needed.
 System
LED Color
PWR Blue
SYS Blue
Wi-Fi Blue
LTE Signal
Blue
(L)
LTE Signal
Blue
(H)
SIM1 & 2 Blue
Function
Reset the Industrial Cellular Gateway to Factory Default
configuration. Industrial Cellular Gateway will then reboot and
load the default settings shown below:
。
Default username: admin
。
Default password: admin
。
Default IP address: 192.168.1.1
。
Subnet mask: 255.255.255.0
Lights Indicates the system is powered on.
Off Indicates the system is powered off.
Blinking Indicates the system works properly.
Off Indicates the system does not work.
Lights Indicates the Wi-Fi is active.
Off Indicates the Wi-Fi is not active.
Lights Indicates the signal is low.
Lights Indicates the signal is normal or high.
Lights Indicates the SIM1 or SIM2 is connecting successfully.
Indicates the SIM1 or SIM2 is connecting unsuccessfully or no
Off
SIM card inserted.
Function
20