Subscribe to Our Youtube Channel
Related Manuals for Planet ICG-2510W-LTE
Summary of Contents for Planet ICG-2510W-LTE
- Page 1 Industrial 4G LTE Cellular Wireless Gateway with 5-Port 10/100/1000T ICG-2510W-LTE/ICG-2510WG-LTE Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Contents ................. 3 2. Requirements ..................4 3. Starting Web Management ..............5 4. Terminal Setup ..................8 4.1. Logging on to Console ..............9 4.2. Configuring IP Address ..............10 5. Recovering Back to Default Configuration ..........11 6. Customer Support ................12... -
Page 3: Package Contents
1. Package Contents Thank you for purchasing PLANET Industrial 4G LTE Cellular Wireless Gateway. Please refer to the table list below for the models used in Europe and the U.S.: 4G LTE Model Name ICG-2510W-LTE-EU B1/B3/B5/B7/B8/B20 B38/B40/B41 ICG-2510WG-LTE-EU ICG-2510W-LTE-US B2/B4/B12 ICG-2510WG-LTE-US Please contact your cellular carrier for more details about LTE band support. “Cellular Gateway” is used as an alternative name in this Quick Installation Guide. -
Page 4: Requirements
2. Requirements z Workstations running Windows 7/8/10/11, macOS 10.12 or later, Linux Kernel 2.6.18 or later, or other modern operating system are compatible with TCP/IP Protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Ethernet Port Connection Network cables -- Use standard network (UTP) cables with RJ45 connec- tors. -
Page 5: Starting Web Management
(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. PLANET Technology Corp. Made in Taiwan Figure 3-2: MAC ID Label... - Page 6 The login screen in Figure 3-3 appears. Figure 3-3: Web Login Screen If you have already changed the password via console or web login, please use this new password to log in and skip steps 2 and 3. 3. After logging in, you will be prompted to change the initial password to a permanent one.
- Page 7 4. Once the password change is complete, re-enter the web interface using your new password and the main screen appears as Figure 3-5 shows. Figure 3-5: Web-based Main Screen of Cellular Gateway 5. When any function item is pressed, the following dialog box will appear. Please enter the user name and password which you have changed. The Cellular Gateway Menu on the top of the Web page lets you access all the commands and statistics the Cellular Gateway provides. Figure 3-6: Cellular Gateway Menu Now, you can use the Web management interface to continue the Cellular Gateway management or manage the Cellular Gateway by console interface.
-
Page 8: Terminal Setup
4. Terminal Setup It is optional for you to configure the system by connecting a serial cable (not included in the package) to a COM port on a PC or notebook computer and to the console port of the Cellular Gateway. ICG-2510W(G)-LTE Serial Port PC/Workstation with Terminal Emulation Software RS232 DB9 Cable COM1... -
Page 9: Logging On To Console
4.1. Logging on to Console Once the terminal is connected to the device, power on the Cellular Gateway, and the terminal will display “running testing procedures”. Then, the following message asks to log in user name and password. The factory default user name and password are shown as follows (or the user name and password which you have changed) and the login screen in Figure 4-3 appears. -
Page 10: Configuring Ip Address
2. The screen displays the current IP address as shown in Figure 4-4. Figure 4-4: IP Information Screen Configuring IP Address 3. At the “#” prompt, enter the following command and press <Enter> as shown in Figure 4-5. admin@ICG-2510W-LTE: ~# nvram set lan_ipaddr=192.168.4.1 admin@ICG-2510W-LTE: ~# nvram commit The previous command would apply the following settings for the Cellular Gateway. IP Address: 192.168.4.1 Subnet Mask: 255.255.255.0... -
Page 11: Recovering Back To Default Configuration
15 seconds. After the device is rebooted, you can log in the management Web interface within the same subnet of 192.168.1.xx. DC Input: 9-36V , 1.5A max. Reset Relay SIM2 SIM1 MicroSD Reset Button Figure 5-1: ICG-2510W-LTE/ICG-2510WG-LTE Reset Button... -
Page 12: Customer Support
6. Customer Support You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET support team. PLANET online FAQs: https://www.planet.com.tw/en/support/faq.php?method=keyword&keyword =ICG-2510 Support team mail address: support@planet.com.tw ICG-2510W-LTE and ICG-2510WG-LTE User’s Manual: https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword =ICG-2510W&view=3#list (Please select your model name from the drop-down menu of Product Models.)
Need help?
Do you have a question about the ICG-2510W-LTE and is the answer not in the manual?
Questions and answers