Table of Contents
Advertisement
Overview
The NPort IA5000A-I/O and IAW5000A-I/O Series consist of serial device
servers with Digital Input/Output (DIO), providing maximum flexibility to
integrate serial equipment in the field into Ethernet networks for a variety
of industrial data acquisition applications. The DIO on a device can be
controlled over TCP/IP, using the Modbus TCP protocol, and it can be
configured and secured from a web browser.
Package Checklist
Before installing the NPort IA5000A-I/O or NPort IAW5000A-I/O Series
device server, verify that the package contains the following items:
•
NPort IA5000A-I/O or NPort IAW5000A-I/O device server with digital
I/O
•
Antenna (for the NPort IAW5000A-I/O Series)
•
Quick installation guide (printed)
•
Warranty card
Optional Accessories
Mini DB9F-to-TB Adapter: DB9-female-to-terminal-block adapter
•
for RS-422/485 applications
WK-51-01: Wall-mounting kit
•
DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85
•
to 264 VAC input
•
DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal
85 to 264 VAC input
•
DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132
VAC or 176 to 264 VAC input, selected by a DIP switch
Notify your sales representative if any of the above items are missing or
damaged.
Hardware Introduction
As shown in the following figures, the NPort IA5000A-I/O Series has two
Ethernet RJ45 LAN ports, and the NPort IAW5000A-I/O Series has one
Ethernet RJ45 LAN port and one antenna for WiFi (IEEE 802.11 standards)
signal communication, supporting 2.4GHz and 5 GHz frequencies. Both
series are equipped with four DIs and two DOs for data acquisition
applications. The NPort IA5000A-I/O and IAW5000A-I/O device server
series come with built-in 4 kV serial port surge protection.
- 2 -
Advertisement
Table of Contents
