Using The Rake; Mounting Rake On Tractor - SaMASZ TANGO 730 Operator's Manual

N-200
N-03; N-04
N-06; N-07
N-23; N-50
N-105; N-133
N-117; N-167
N-168; N-183
N-124
N-01; N-49
N-15; N-52
N-82; N-162

5. USING THE RAKE

5.1. Mounting rake on tractor

Rake Tango 730 cooperates with tractors with power from 60
The rake should be attached to a tractor with use of tractor's lower pull-cables as provided in
Fig. 8. For this purpose drive the tractor at the rake's catch, and then place hangers W of
tractor's lower pull-cables on pins S on the rake's linkage.
Once the rake is mounted turn support leg back (Fig. 8).
Connect hydraulic hoses.
Connect machine's controller to tractor's lighter outlet (12V) by means of a plug and a three-pin
plug to socket on the rake's linkage. Fix the controller in tractor's cabin by means of magnetic
holder in a visible place.
Connect the machine's lighting cables to the tractor and check the lights for operation.
Connect telescopic articulated shaft. If need be shorten the shaft as per item 5.4.
Instruction manual
N-182
N-184 N-200 N-182
N-156; N-157
N-179; N-180
Fig. 7. Placement of warning decals
- 13 -
Two rotor rake
TANGO
N-202
HP.