Settings; Storing And Transporting - Datcon DT9502 Operating Instructions Manual

DT9502
20171205-V3

3.3. Settings

According to the default factory setting, the probe Pt100 is
connected in 4-wire mode. For the transmitter -200 °C is
assigned to 4 mA, and +600 °C is assigned to 20 mA. The
number of averaged samples is 8, the display refreshing
time is 0.5 sec
.
After the apparatus has been installed, it is functionable
immediately, without any further settings.
Re-scaling the transmitter, or changing other factory default
settings (e.g. setting the device to 3-wire operating mode)
could be performed simply and easily by using the press-
buttons on the front panel. There is no need for further
adjustments (neither by any tools nor by instruments).

3.4. Storing and transporting

The apparatus could be transported and stored in places
with climates specified in chapter 10.1. Technical data,
under the title „Ambient conditions".
A packaging is applied to protect the apparatus against
normal impacts occurring during transportation. The
corrugated cardboard box is made from environmentally
friendly and reusable paper. The disposal of the internal
foam material is recommended to take place through a
company specialised for recycling.
Storing in dry places, on room temperature, free from
vibrations has beneficial effects on the expectable lifetime of
the apparatus DT9502.
9