Datcon DT9502 Operating Instructions Manual page 78



78
Detailed description of the limit value operating modes

•
: Switched OFF [this is the default factory setting]
Independent of the measured temperature, the limit output
is always switched OFF.

•
: It switches ON, when: measured temperature ≥
low limit
The output switches ON, if the displayed temperature ≥
numerical value defined as the
In this operating mode the value of the
indifferent: it does not influence the operation of the output.
Example for the application:
Switching a cooling system ON above a given temperature
value.

.

parameter is
20171205-V3
DT9502