Datcon DT9502 Operating Instructions Manual page 41

DT9502
Exit from the menu item 1. After you have completed the setting, press the MENU
Exit from the menu
20171205-V3
button. With this you leave the menu itemt, and you see

this: .
(2. If you want to change the setting you have just
completed, or if you just want to check what you have
written in, go on with the operations from point 3 of the
Sequence of operations.)
(3. If you do not want to exit the menu as you want to do
other settings too, you may use the ▲ button to select the
desired menu items.)
Press the MENU button. First you see the script
(Save) and then the script
saving of the settings is ready. The apparatus has left the
menu and goes on with the measurement.

(Exit). With this the

41