Table of Contents
Advertisement
DT9502
20171205-V3
•
The minimum value and the maximum value can be
deleted after a supervisor-level entry, by using the menu
item No. 14. (Deleting the minimum and the maximum
values).
(3) ENTER button: presenting the limit output status on the
display.
Its operation depends on the operating mode of the limit
value display modes. In factory default setting, this function
is disabled, thus no changes take place when the button is
pressed down. For detailed description please read the
chapter 7.3. Display modes of limit outputs.
Further function: acknowledgement of alarms. Upon its
effect the limit outputs being in „Alarm mode" get switched
off.
25
Advertisement
Table of Contents
