Exit Menu - Xycom XVME-655 Manual

VMEbus BERR ANMI
VMEbus IRQ1-IRQ7

Exit Menu

This menu prompts you to exit setup.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced
Save Changes & Exit
Exit without Saving Changes
Get Default Values
Load Previous Values
Save Changes
­¯
F1 Help
¨ Select Menu
ESC Exit
Option
Save Changes & Exit
Exit Without Saving Changes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Determines whether the auxiliary non-maskable interrupt (ANMI) is enabled
on power-up for a VMEbus error. The default is "Disabled."
Determines which of the VMEbus auxiliary maskable interrupt (AMI) levels
(1-7) can be received by the XVME-655. Each interrupt level can be
enabled or disabled individually. All are disabled by default.
Security
Select Item -/+
Enter
Figure Chapter 3 -16. Exit Menu
Description
Saves in battery-backed CMOS the selections displayed in the menus.
After you save your selections, the program displays this message:
"Values have been saved."
"[Continue]"
If you attempt to exit without saving, the program asks if you want to
save before exiting. The next time you boot your computer, the BIOS
configures your system according to the setup selections stored in
CMOS. If those values cause the system boot to fail, reboot and press
2 to enter the BIOS setup menus. In these menus, you can set the
F
default values (as described below) or change the selections that
caused the boot to fail.
Exit the BIOS setup menus without storing any changes you may have
made. The selections previously in effect remain in effect.
Chapter 3 – BIOS Setup Menus
VMEbus Exit
Item Specific Help
If the item you are viewing
has specific help, it will
be listed here.
Change Values F9
Select } Sub-Menu
F10 Previous Values
Setup Defaults
3-20