Security Menu - Xycom XVME-655 Manual

Option
Enable Master
Default Latency Timer
Latency Timer
PCI IRQ line 1-4

Security Menu

This menu prompts you for the new system password and requires you to verify the
password by entering it again.
Use a password to restrict access to the setup menus or prevent unauthorized booting of
the unit. You can also use the supervisor password to change the user password.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced
Supervisor Password is
User Password is
Set Supervisor Password
Set User Password
Password on boot:
Diskette access:
Fixed disk boot sector:
System backup reminder:
Virus check reminder:
­¯
F1 Help Select Item
¨ Select Menu
ESC Exit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
Enables the selected device as a PCI bus master.
Controls PCI bus master time-out when set to "Yes," which is the default. The
default uses the minimum bus master clock rate.
Displays the current value of the latency timer when the Default Latency Timer
option is set to "No."
A PCI device cannot use IRQs already in use by ISA or EISA devices. Set this
field to "Auto Select" only if no ISA or EISA legacy cards are installed. Other
options are 3, 5, 9, 11, 12, 14, 15, or disabled.
Security
Disabled
Disabled
[Press Enter]
Press Enter
[Disabled]
[Supervisor]
[Normal]
[Disabled]
[Disabled]
-/+ Change Values
Enter Select } Sub-Menu
Figure Chapter 3 -11. Security Menu
Chapter 3 – BIOS Setup Menus
VMEbus Exit
Item Specific Help
If the line item you are
viewing has specific help,
it will be listed here.
F9 Setup Defaults
F10 Previous Values
3-13