Numlock Submenu - Xycom XVME-655 Manual

Numlock Submenu

PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main
Keyboard Features
Numlock:
Key Click:
Keyboard auto-repeat rate:
Keyboard auto-repeat delay:
­¯
F1 Help Select Item
¨ Select Menu
ESC Exit
Option
Numlock
Keyboard click
Keyboard auto-repeat rate
Keyboard auto-repeat delay
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
[Auto]
[Disabled]
[30/sec]
[½ sec]
-/+ Change Values
Select } Sub-Menu
Enter
Figure Chapter 3 -6. Numlock Submenu
Description
Determines how BIOS defines the numlock key at power up or soft
reset. Normally, BIOS sets the numlock (numeric keys selected) if it
detects a 101- or 102-key keyboard at power up. If it detects an 84-key
keyboard, it turns numlock off (cursor keys selected). Select Auto to
keep this state; On to select numeric keys, regardless of keyboard; or
Off to select cursor keys, regardless of keyboard. The default is Auto.
Provides audible key-press feedback by causing a click through the
system speaker every time a key is pressed, if enabled. This option is
only valid for systems with a speaker connected to the speaker jack.
The default is disabled.
Defines the rate at which the keyboard repeats while a key is pressed.
The higher the number, the faster the key repeats. The default is 30
times per second.
Sets the number of times per second a key will repeat when it is held
down. The default is a ½ second.
Chapter 3 – BIOS Setup Menus
Item Specific Help
If the line item you are
viewing has specific help,
it will be listed here.
F9 Setup Defaults
F10 Previous Values
3-8