5.3.2. Installation of the Standalone Software (OPT023)
(1) Install the software file
Setup Wizzard (similar procedure described in chapter 5.3).
At the end of the installation you see the following window:
Fig. 4
Installation standalone software
(2) Request the IP address by clicking Discover.
(3) Enter the address marked in the red circle above into the field Network in the
Communication Settings.
20
_SIM_LC1220_V
SETUP
Scientific Instruments Manufacturer GmbH
D-Oberhausen ● +49 (0)208/ 94 10 78-0 ● www.sim-gmbh.de
.
and follow the instructions in the
XXX
EXE
User Manual SIM Sample Cooler_06/2018