Agilent Technologies 1220 Infinity II LC Series User Manual page 23

Display Definition
Transfer the set temperature to the cooling module
Set
Switch off only the Peltier element of the cooling module (the complete
OFF cooling module is switched on/off with the switch at the rear of the module,
see Fig. 2).
Current
Shows the actual temperature at the cooling plate
temperature
Config Settings for APG Interface:
Select the "Ready" conditions by clicking on the Config button.
Fig. 7 Settings for APG interface
User Manual SIM Sample Cooler_06/2018
Scientific Instruments Manufacturer GmbH
D-Oberhausen ● +49 (0)208/ 94 10 78-0 ● www.sim-gmbh.de
23