Table of Contents
Advertisement
OpenLAB Versions:
In case of using OpenLAB driver, you can start the cooling module manually for the first
equilibration before the sequence will be started.
7. MAINTENANCE
Cautions and Warnings
DANGER/ DANGER
Risk of electrocution!
Danger d'électrocution!
Module is partially energized when switched off, as long as the power
cord is plugged in.
L'alimentation continue à utiliser un peu d'électricité, même si
l'interrupteur du panneau avant est en position d'arrêt (OFF).
Disconnect the power cord before any maintenance or repair.
Débranchez le câble d'alimentation de l'instrument avant d'ouvrir le
capot de l'instrument.
WARNING/ AVERTISSEMENT
Risk of personal injury through sharp metal edges!
Des blessures grave par les composants de l'instrument dotées!
Sharp-edged parts of the equipment may cause injuries.
Les composants de l'instrument dotées d'arêtes tranchantes peuvent
occasionner des blessures.
To prevent personal injury, be careful when getting in contact
with sharp metal areas.
Afin d'éviter de vous blesser, prenez garde aux arêtes métalliques
tranchantes
NOTE
ESD can damage electronic boards and components! Electronic boards and components
are sensitive to electrostatic discharge (ESD).
Be sure to hold the board by the edges, and do not touch the electrical components.
Always use ESD protection (for example, an ESD wrist strap) when handling electronic
boards and components.
User Manual SIM Sample Cooler_06/2018
Scientific Instruments Manufacturer GmbH
D-Oberhausen ● +49 (0)208/ 94 10 78-0 ● www.sim-gmbh.de
25
Advertisement
Table of Contents
