Safety Instructions; Warnings - Agilent Technologies 1220 Infinity II LC Series User Manual

1. SAFETY INSTRUCTIONS

NOTE
The cooling module for the Agilent 1220 Infinity II LC system has to be mounted, started-up
and serviced by fully trained and qualified personnel only, taking into consideration the
generally recognized standard rules of technology.
It has to be ensured that employees or third persons are not exposed to any danger.
All safety instructions and warnings in this manual, particularly those concerning installation,
start-up, and maintenance must be strictly observed.
(1) Unpack the module and ensure that all parts and materials listed on the attached packing
list have been delivered. In case of transport damage please inform the transport
company immediately.
(2) Check all relevant safety regulations and technical indications for the specific installation
place with reference to the "User Manual of the Agilent 1220 Infinity II LC System"
(G4280-90016).
(3) Prevent errors and protect persons against injuries and the device against damage.
(4) Make sure that the ventilation slots of the module are not covered and sufficient
ventilation is provided (additional 10 cm (3.9 in) space to the side and in the rear).
(5) Periodically remove dust from the ventilation slots to prevent overheating of the system.

1.1. Warnings

The warnings in this manual are highlighted with pictograms and signal words:
Les avertissements de ce manual sont mis en evidence par des pictogrammes et des mots
de signalisation:
The pictogram and the signal word indicate the level of danger.
Le pictogramme et le mot de signalisation indiquent le niveau de danger.
The warnings that precede each action are depicted as follows:
Les avertissements qui précèdent chaque action sont représentés comme suit:
4
DANGER/WARNING
DANGER/ AVERTISSEMENT
Type and source of danger
Type et source de danger
Explanation of the type and source of danger
Explication du type et de la source du danger.
Measures to avert the danger
Mesures pour éviter le danger
Scientific Instruments Manufacturer GmbH
D-Oberhausen ● +49 (0)208/ 94 10 78-0 ● www.sim-gmbh.de
User Manual SIM Sample Cooler_06/2018