Connection
Viewing Window
5.2. Software Installation
(1) Finalize the installation of the Agilent 1220 Infinity system with performing a checkout run
(User Manual G4280-90016, chapter 3).
(2) Then install the software file setup_SIMPeltierDriver_Vxxx.exe (for using OpenLAB
CDS ChemStation/EZChrom/2.x, see chapter 5.3.1) or setup_SIM_LC1220_Vxxx.exe
(for using stand-alone version, see chapter 5.3.2) on the PC.
The cooling module is set to a default fixed IP address – 192.168.254.99 (Class C
network with a subnet mask of 255.255.255.0). You can communicate with the device as
long as no DHCP server assigns another IP address to the module.
5.3. Set-Up and configuration for OpenLAB ChemStation/ EZChrom
(OPT021/022/024)
12
Action
the water level should be within the min/max marking when the
pump is not working (possibly use a torch)
Scientific Instruments Manufacturer GmbH
D-Oberhausen ● +49 (0)208/ 94 10 78-0 ● www.sim-gmbh.de
(1) Start the exe.file and follow
the instructions of the Setup
Wizard.
User Manual SIM Sample Cooler_06/2018