Bauer LINESTAR 9000 Operating Manual page 61


Lubricate cardan joints

Check easy moving of guiding rollers of cable guidance

Check distance and parallel moving of central unit with respect to furrow or cable control

Check straightness of guiding cable or furrow
Drive unit

Check oil level of wheel gears and drive motors

Change oil after first irrigation season, then every third irrigation season

Wheel gear: Make sure the drainage holes on bearing covers and the vent hole of the
expansion chamber are not clogged

Wheel gear Type TNT – Lubricate shifting device

Drive motor: Make sure the drainage hole at bottom side of the motor is not clogged.

Wheel gear, drive motor - check tightness of shaft sealing rings

Lubricate freewheel hubs of towable wheel gears

Check screw connections of driveline couplers

Check if rubber packages of driveline couplers are damaged. Replace worn and broken
rubber packages.

Check wheel nuts

Check tire pressure:

1.5 bar with tires 14.9 – 24

bar with tires 11.2 – 24

0.8 bar with tires 16.9 – 24

Make sure tires are not damaged

Check anti-twist protection of drive shaft cover
Generator unit

see separate motor manual
Operating Manual for BAUER LINESTAR 9000 with hose feed
Extent of Service
X X
X X
X X
X X
X
X
X
X X
X
X X
X
X
X X
X X
X X
X
X X
53