Starting Into Opposite Direction After Automatic Shut-Down Of Linestar; Maintenance Instructions; Service Intervals - Bauer LINESTAR 9000 Operating Manual

If the switch "GENSET OFF – ON" has been put to „ON", the generator unit shuts down automatically. If the switch
has been turned to „OFF" the generator unit must be shut down separately
The water supply is cut automatically by the shut-off valve
17.7.3 STARTING INTO OPPOSITE DIRECTION AFTER AUTOMATIC SHUT-DOWN OF
LINESTAR
As described in chapter 17.4

18 MAINTENANCE INSTRUCTIONS

Note
Guarantee claims can only be processed if the regulations concerning handling, maintenance (according to service
plan) and care have been observed. All service works must be carried through by an authorised dealer and they
must be confirmed in the service plan. The service plan is considered as evidence for warranty claims.
The meaning of the service plan
The service plan stipulates the time and kind of service. In the evidence spaces we confirm the carrying out of the
service which can be a condition for possible warranty claims.
We kindly ask you to understand that normal wear and tear as well as damages due to overstrain, improper use or
unauthorized modifications are excluded from this guarantee.
 Always cut power before starting any maintenance work on the system. Turn the main switch to "0" and lock the
switch to prevent unauthorised or unintentional re-closing of the system. Always cut power supply by your own.
 Be sure to re-install all protective devices which have been dismounted during maintenance.

18.1 SERVICE INTERVALS


Monthly service

Annual service
Operating Manual for BAUER LINESTAR 9000 with hose feed
51