Bauer LINESTAR 9000 Operating Manual page 31

3. Cable
The Cable is attached to the posts by the means of clips welded onto the posts.
Attach one end of the cable to the end post with a thimble and three clips. Five meters before the opposite end of
the cable attach a second, 10 m long cable to the main cable with three clips. Fasten the end of this second cable
to a vehicle or a tractor and pull until the cable is well tensioned. Recommended cable tension: approx 4000 N.
After tensioning fasten the main cable to the end post and remove the auxiliary cable.
Operating Manual for BAUER LINESTAR 9000 with hose feed
Bodenanker
End Post
Klemme
Clip
Seil
Cable
Seilhalter
Cable Holder
Seilklemmen
Cable Clamps
2. Seil
Second Cable
Hauptseil
Main Cable
Weg
Road
23