TECHNICAL DATA TECHNICAL DATA DIMENSIONS 3.1.1 Kelly Equipment BK 28/419/4/36 Dimensions in [mm] 6774 4540 3657 3560 BU20065001.wmf BG 24 H / 2010 3 - 1...
19° to left 8° to right 8° During operation with work equipment See load capacity chart Operating Range See load capacity chart Working weight With: Kelly BK 28/419/4/36 Approx. 90.5 tonnes BG 24 H / 2010 3 - 2...
Page 5
2nd gear Drehzahl n [1/min] / Speed n [rpm] Drehzahl n [1/min] / Speed n [rpm] BU710502.wmf BU710504.wmf 1st gear reduced Drehzahl n [1/min] / Speed n [rpm] Efficiency not considered BU710503.wmf BG 24 H / 2010 3 - 4...
Page 6
Highest possible position of kelly lifting eye BJ608503.wmf Highest possible position of kelly driver upper edge Lowest possible position of kelly driver upper edge Length of drilling tool: 1.6 m BAUER Casing Oscillator BG 24 H / 2010 3 - 5...
Page 7
Technical data: Finished length 75 m Diameter 28.00 mm Characteristics: Lay and direction Cross lay, right-hand (SZ) Rotation characteristics Low-tension (SPA), non-rotating Rope end characteristics Pointed / full thimble bore 60 mm BG 24 H / 2010 3 - 6...
Page 8
Technical data: Finished length upper rope 68 m lower rope 62 m Diameter 24.00 mm Characteristics: Lay and direction Regular lay, left (zS) Rotation characteristics Rotating Rope end characteristics Pointed / pointed BG 24 H / 2010 3 - 7...
The drilling equipment can be used at temperatures ranging from -20° C to +40° C (-4 to +104 F). For use in temperatures outside the specified range, BAUER must be consulted. EXPOSURE TO VIBRATIONS The operator’s exposure to vibration acceleration during operation with this equipment is less than 0.5 m/s...