Curve Diagram - JUMO LOGOSCREEN 600 Brief Instructions

5.4.1

Curve diagram

In the curve diagram, the analog and digital signals configured for the relevant group are dis-
played as analog curves or digital traces. Digital traces and channel information can be hidden
in the group configuration.
The diagram type (horizontal, vertical) is selected individually for each group in the configura-
tion. The following view shows the vertical diagram. Accordingly, the description also applies to
the horizontal diagram (see the example later on).
Group view
(1)
(2)
(3)
(1) Description (point) of the analog curve
(2) Analog curve (color change with alarm)
(3) Channel information: description
(pointer), short signal description (con-
figurable), and current value of analog
signal (color change with alarm)
Navigation bar
(1) Hide/show digital traces
(2) Hide/show channel information
(3) Hide/show analog values
(4) Description (point) of the digital trace
(5) Digital trace
(6) Event off
(7) Alarm off
(8) Event on
(9) Alarm on
(10) Navigation bar
(1) (2) (3)
(4) Call up memory display (history)
(5) Go to next active group
5 Operation
(4) (5)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
41