Display And Control Elements; Connection Elements - JUMO LOGOSCREEN 600 Brief Instructions

2 Description
2.3

Display and control elements

(1) Touchscreen (TFT color screen)
Technical data:

The screen appearance is described in
the "Operation" chapter.

CAUTION!
Protection type IP65 (front-side) only with closed USB host interface.
Protection type IP65 is only guaranteed with the available default cover of the USB host in-
terface.
Only remove the cover to use the interface; then remount the cover immediately (the cover
must be flush with the front of the device).
2.4

Connection elements

The connecting elements on the rear of the device and the front-side USB host interface are
described in the "Electrical connection" chapter.
 Chapter 4.3 "Connection elements", page 25
18
(1)
Chapter 6.1.7 "Screen", page 74
Chapter 5.1.1 "Touchscreen", page
31
(2) Alarm LED
The LED is lit while an alarm is pending.
(3) Power LED
The LED flashes after switching on the
device until the startup process is com-
pleted. It is then permanently lit.
(4) USB host interface with cover
To remove the cover, take hold of the lug
and pull it out.
(2)
(3)
(4)