Comment Text - JUMO LOGOSCREEN 600 Brief Instructions

Detailed view
(1)
(2)
(1) Description (configurable) of the coun-
ter/integrator
(2) Details of current counter/integrator
The type (configurable; here: external)
decides when the status of the counter/
integrator is stored and thus completed.
(3) Details of the completed counter/inte-
grator
5.4.10

Comment text

This function can be used to enter a text (max. 160 characters) that is entered after completing
the entry in the event list.
 Chapter 5.5 "Text input dialog", page 56
The comment text is either assigned to the concerned group or all groups. The assignment de-
pends on the current visualization in which the device is in when the function is invoked.
With the following visualizations the comment text is assigned to all groups: current batch, com-
pleted batch, process screen, counter/integrator
With the following visualizations the comment text is only assigned to the concerned group:
curve diagram, digital diagram, bar graph, text image, report
The assignment to a certain group applies when only the event list of a certain group is dis-
played (memory presentation, curve presentation of the completed batch). In addition, the
PCA3000 PC evaluation software can filter the events according to groups.
Comment with authentication
Depending on the "Comment with authentication" parameter (as of device version 02), user ID
and password are required to enter a comment text (see operating manual, chapter "Configu-
ration - in the setup program only" > "User list" > "Password rules").
(3)
(4) Limit value for max. alarm (configurable)
(5) Bar graph view of the current counter/
integrator
Start and end of the display range are
configurable.
(6) Back to view of all activated counters/
integrators
(7) Display of the last 7 completed batch/
counter readings
5 Operation
(4)
(5)
(6)
(7)
55