Acceptance Of Goods, Storage, And Transport; Checking The Delivery; Notes On Storage And Transport; Returning Goods - JUMO LOGOSCREEN 600 Brief Instructions

1.2

Acceptance of goods, storage, and transport

1.2.1

Checking the delivery

• Ensure that the packaging and contents are not damaged
• Check that the delivery is complete using the delivery papers and the order details
• Inform the supplier immediately if there is any damage
• Store damaged parts until clarification is received from the supplier
1.2.2

Notes on storage and transport

• Store the device in a dry, clean environment. Observe the admissible environmental condi-
tions (see "Technical data")
• Protect the device from shock during transport
• The original packaging provides optimum protection for storage and transport
1.2.3

Returning goods

In the event of repair, return the complete device in clean condition.
Use the original packaging to return goods.
Accompanying letter for repair
Please include the completed accompanying letter for repair when returning goods.
Do not forget to state the following:
• Description of the application and
• Description of the error that has occurred
The accompanying letter for repair can be downloaded online from the manufacturer's homep-
age (use the search function if necessary).
Protection against electrostatic discharge (ESD)
(ESD = electrostatic discharge)
To prevent damage due to ESD, electronic modules or components must be handled, pack-
aged, and stored in an ESD-protected environment. Measures against electrostatic discharge
and electrical fields are described in DIN EN 61340-5-1 and DIN EN 61340-5-2 "Protection of
electronic devices from electrostatic phenomena".
When returning electronic modules or components, please note the following:
• Pack sensitive components only in an environment providing protection against ESD. Work-
spaces such as this divert electrostatic charges to ground in a controlled manner and pre-
vent static charges due to friction.
• Use only packaging intended specifically for ESD-sensitive modules/components. These
must consist of conductive plastics.
No liability can be assumed for damage caused by ESD.
1 Introduction
9