Connection Diagram; Analog Inputs 1 To 6 (Options 1 And 2) - JUMO LOGOSCREEN 600 Brief Instructions

4 Electrical connection
NOTE!
The front-side USB host interface is intended exclusively for connecting a USB flash drive.
Any other use is not admissable.
NOTE!
The quality of the USB cable and the USB flash drive has an influence on the correct function
of the device. It is recommended to use the components provided by the manufacturer (ac-
cessories).
CAUTION!
The device is not suitable for connecting to a PoE (Power over Ethernet) port.
There is a risk of damage to the device.
Connect the device to an Ethernet port without PoE.
4.4

Connection diagram

4.4.1

Analog inputs 1 to 6 (options 1 and 2)

Measuring probe
Thermocouple
RTD temperature probe
two-wire circuit
RTD temperature probe
three-wire circuit
RTD temperature probe
four-wire circuit
Resistance transmitter
Resistance/potentiometer
two-wire circuit
26
Connection element / Assignment Terminals and connection symbol
7. / Analog input 1
8. / Analog input 2
9. / Analog input 3
11. / Analog input 4
12. / Analog input 5
13. / Analog input 6
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
A S E
1 2 3 4 5