Digital Diagram - JUMO LOGOSCREEN 600 Brief Instructions

5 Operation
5.4.2

Digital diagram

In the digital diagram, the digital signals configured for the relevant group are displayed as dig-
ital traces.
The diagram type (horizontal, vertical) is selected individually for each group in the configura-
tion. The following view shows the vertical diagram. Accordingly, the description also applies to
the horizontal diagram.
Group view
(1)
(2)
(1) Description (point) of the digital trace
Displays the logical state:
Colored button = HIGH (B1, B3)
Colored frame = LOW (B2)
(2) Digital trace
Navigation bar
(1) Call up memory display (history)
Memory display
See memory display in the curve diagram.
 Chapter 5.4.1 "Curve diagram", page 41
44
(3) Digital signal description (configurable)
(4) Navigation bar
(1)
(2) Go to next active group
(3)
(4)
(2)