Bar Graph - JUMO LOGOSCREEN 600 Brief Instructions

5.4.3

Bar graph

In the bar graph view, the analog signals configured for the relevant group are shown as bar
graphs, and the digital signals – depending on their logical state – as colored areas or frames.
The diagram type selected for the group (horizontal, vertical) is irrelevant for the bar graph view.
The view is always as a column diagram (vertical) and not as a bar diagram (horizontal).
Group view
(1)
(2)
(3)
(1) Short analog signal description (configu-
rable)
Call up individual view of analog signal
(numerical view and bar graph); see text
image - individual view.
(2) Bar diagram of the analog signal (color
change with alarm)
(3) Digital signal with short signal descrip-
tion (configurable) and designation
(pointer)
Displays the logical state:
Colored button = HIGH (B1, B3)
Colored frame = LOW (B2)
(4) Current analog value (color change with
alarm)
(5) End value of scaling (display range,
configurable)
(6) Limit value for max. alarm (configurable)
(7) Limit value for min. alarm (configurable)
(8) Start value of scaling (display range,
configurable)
(9) Go to next active group
5 Operation
(4)
(5)
(6)
(7)
(8)
(9)
45