Completed Batch - JUMO LOGOSCREEN 600 Brief Instructions

5 Operation
5.4.7

Completed batch

This function displays the report for the completed batch recording. Recorded data can be
shown as a report and as a curve diagram.
If necessary, the report can also display the data from current batch recording.
View
(1)
(1) Open report (statistical information for
the completed batch recording, and, if
necessary, the current batch recording)
Electronic signature
With extra code 888 (FDA) and with the corresponding configuration in the PCS software the
completed batch can be provided with an electronic signature. The signature can only be pro-
vided once per completed batch; it cannot be revoked. If a signature was provided already then
this state is displayed through the following symbol (3):
Any user who has the corresponding authorization can sign the signature ("Confirm batches,
electronic signature" right). This can be another user than the one who is currently logged on.
Configuration of the electronic signature: see operating manual, "Configuration – in the setup
program only" chapter > "Electronic signature".
Example of an electronic signature:
 Chapter 5.8 "Electronic signature", page 63
52
(2) Open curve presentation (analog curves
and digital traces of the completed batch
recording)
(3) Rendering electronic signature or dis-
play information about rendered signa-
ture
(2)
(3)