Keyless Entry Key Fob To Memory; Memory Position Recall - Jeep CHEROKEE 2020 Owner's Manual

3. Push and release the set (S) button on the
memory switch, then push memory button
(2) within five seconds. The instrument
cluster display will display which memory
position is being set.
NOTE:
Memory profiles can be set without the

vehicle in PARK, but the vehicle must be in
PARK to recall a memory profile.
To set a memory profile to your key fob, refer

to "Linking And Unlinking The Remote
Keyless Entry Key Fob To Memory" in this
section.
L A U T
INKING ND NLINKING
K E K F T
EYLESS NTRY EY OB
Your remote keyless entry key fob can be
programmed to recall one of two
pre-programmed memory profiles with a push
of the unlock button on the key fob.
NOTE:
Before programming your key fob you must
select the "Personal Settings Linked to Key
Fob" feature through the Uconnect system
screen.
Refer to "Uconnect Settings" in "Multimedia"
for further information.
To program your key fob, perform the following:
1. Place the vehicle's ignition in the OFF
position.
2. Select the desired memory profile 1 or 2.
NOTE:
If a memory profile has not already been set,
refer to "Programming The Memory Feature" in
this section for instructions on how to set a
memory profile.
3. Push and release the set (S) button on the
memory switch, then within five seconds
R
HE EMOTE
push and release the button labeled (1) or
M
O EMORY
(2) accordingly. "Memory Profile Set" (1 or
2) will display in the instrument cluster
display.
4. Push and release the lock button on the key
fob within 10 seconds.
GETTING TO KNOW YOUR VEHICLE
NOTE:
Your key fob can be unlinked to your memory
settings by pushing the set (S) button, followed
by pushing the unlock button on the key fob
within 10 seconds.
M P R
EMORY OSITION ECALL
NOTE:
The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the
vehicle is not in PARK, a message will display in
the instrument cluster display.
To recall the memory settings for driver one,

push memory button number (1) or the
unlock button on the key fob linked to
memory position 1.
To recall the memory settings for driver two,

push memory button number (2) or the
unlock button on the key fob linked to
memory position 2.
A recall can be canceled by pushing any of the
memory buttons (S, 1, or 2) during a recall.
When a recall is canceled, the driver seat will
stop moving. A delay of one second will occur
before another recall can be selected.
33
2