System Malfunction; Speed Control - If Equipped - Jeep CHEROKEE 2020 Owner's Manual

Hide thumbs Also See for CHEROKEE 2020:
Table of Contents

Advertisement

1. Push the Stop/Start OFF switch (located on
the switch bank). The light on the switch
will illuminate.
Stop/Start OFF Switch
2. The "STOP/START OFF" message will
appear in the instrument cluster display.
Refer to "Warning Lights And Messages" in
"Getting To Know Your Instrument Panel"
for further information.
3. At the next vehicle stop (after turning off the
Stop/Start system), the engine will not be
stopped.
4. The Stop/Start system will reset itself back
to the ON mode every time the ignition is
turned off and back on.
T
M
T
O
T
O
ANUALLY
URN
N
HE
S
S
TART
YSTEM
Push the Stop/Start OFF switch (located on the
switch bank). The light on the switch will turn
off.
S
M
YSTEM
ALFUNCTION
If there is a malfunction in the Stop/Start
system, the system will not shut down the
engine. A "SERVICE STOP/START SYSTEM"
message will appear in the instrument cluster
display. Refer to "Warning Lights And
Messages" in "Getting To Know Your
Instrument Panel" for further information.
If the "SERVICE STOP/START SYSTEM"
message appears in the instrument cluster
display, have the system checked by an
authorized dealer.
STARTING AND OPERATING
SPEED CONTROL — IF EQUIPPED
S
/
TOP
When engaged, the Speed Control takes over
accelerator operations at speeds greater than
20 mph (32 km/h).
The Speed Control buttons are located on the
right side of the steering wheel.
Speed Control Buttons
1 — On/Off
2 — SET (+)/Accel
3 — RES/Resume
4 — SET (-)/Decel
5 — CANC/Cancel
215
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents