Steering Wheel; Tilt/Telescoping Steering Column - Jeep CHEROKEE 2020 Owner's Manual

NOTE:
To remove the head restraint, raise it as far

as it can go. Then, push the release button
and the adjustment button at the base of
each post while pulling the head restraint up.
To reinstall the head restraint, put the head
restraint posts into the holes and push down-
ward. Then, adjust the head restraint to the
appropriate height.
The seatback may need to be reclined in

order to fully remove the outboard head
restraints.
Outboard Head Restraint
1 — Release Button
2 — Adjustment Button
Center Head Restraint
1 — Adjustment Button
2 — Release Button
WARNING!
ALL the head restraints MUST be reinstalled
in the vehicle to properly protect the
occupants. Follow the re-installation
instructions above prior to operating the
vehicle or occupying a seat.
GETTING TO KNOW YOUR VEHICLE

STEERING WHEEL

T /T S
ILT ELESCOPING TEERING
This feature allows you to tilt the steering
column upward or downward. It also allows you
to lengthen or shorten the steering column. The
tilt/telescoping lever is located below the
steering wheel at the end of the steering
column.
Tilt/Telescoping Lever
43
C
OLUMN
2