Linking And Unlinking The Remote Keyless Entry Transmitter To Memory; Memory Position Recall; Easy Entry/Exit Seat (Available With Memory Seat Only) - Jeep Cherokee Operating Information Manual

Linking And Unlinking The Remote
Keyless Entry Transmitter To
Memory
Your Remote Keyless Entry (RKE) transmitters
can be programmed to recall one of two pre-
programmed memory profiles with a press of
the UNLOCK button on the RKE transmitter.
To program your RKE transmitters, perform the
following:
1. Remove the key from the ignition.
2. Select the desired memory profile 1 or 2.
3. Press and release the SET button on the
memory switch, then within five seconds press
and release the side of the rocker switch la-
beled 1 or 2 accordingly. Memory Profile Set"
(1 or 2) will display in the EVIC, if equipped.
4. Press and release the LOCK button on the
RKE transmitter within 10 seconds.
NOTE:
Your RKE transmitters can be unlinked to
the memory setting by pressing the SET
button followed by the UNLOCK button on
the RKE transmitter in Step 4 above.
88

Memory Position Recall

NOTE:
• For vehicles equipped with an automatic
transmission, the vehicle must be in
PARK to recall memory positions. If a
recall is attempted when the vehicle is not
in PARK, a message will display in the
EVIC, if equipped.
• For vehicles equipped with a manual
transmission, the vehicle speed must be
at 0 mph (0 km/h) to recall memory posi-
tions. If a recall is attempted with the
vehicle speed above 0 mph (0 km/h), a
message will display in the EVIC, if
equipped.
To recall the memory settings for driver one,
press MEMORY button number 1 or the UN-
LOCK button on the RKE transmitter linked to
memory position 1.
To recall the memory setting for driver two,
press MEMORY button number 2 or the UN-
LOCK button on the RKE transmitter linked to
memory position 2.
A recall can be cancelled by pressing any of
the MEMORY buttons (S, 1, or 2) during a
recall. When a recall is cancelled, the driver
seat will stop moving. A delay of one second
will occur before another recall can be se-
lected.
Easy Entry/Exit Seat (Available With
Memory Seat Only)
This feature provides automatic driver seat
positioning to enhance driver mobility when
entering and exiting the vehicle.
The distance the driver seat moves depends
on where you have the driver seat positioned
when you remove the key from the ignition
switch.
• When you remove the key from the ignition
switch, the driver seat will move about 2.4 in
(60 mm) rearward if the driver's seat position
is greater than or equal to 2.7 in (68 mm)
forward of the rear stop. The seat will return
to its previously set position when you insert
the key into the ignition switch and turn it out
of the LOCK position.