Table of Contents
Advertisement
46
GETTING TO KNOW YOUR VEHICLE
O
M
UTSIDE
IRRORS
To receive maximum benefit, adjust the outside
mirror(s) to center on the adjacent lane of traffic
and a slight overlap of the view obtained from
the inside mirror.
NOTE:
The passenger side convex outside mirror will
give a much wider view to the rear, and espe-
cially of the lane next to your vehicle.
WARNING!
Vehicles and other objects seen in an outside
convex mirror will look smaller and farther
away than they really are. Relying too much
on side convex mirrors could cause you to
collide with another vehicle or other object.
Use your inside mirror when judging the size
or distance of a vehicle seen in a side convex
mirror.
Power Mirrors
The power mirror switches are located on the
driver's door trim panel.
Power Mirror Switches
1 — Left And Right Mirror Select
2 — Mirror Direction Control
H
M
— I
E
EATED
IRRORS
F
QUIPPED
These mirrors are heated to melt frost
or ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped).
Refer to "Climate Controls" in "Getting To Know
Your Vehicle" for further information.
I
V
M
LLUMINATED
ANITY
IRRORS
An illuminated vanity mirror is on each sun
visor. To use the mirror, rotate the sun visor
down and swing the mirror cover upward. The
lights will turn on automatically. Closing the
mirror cover will turn off the light.
Illuminated Vanity Mirror
Sun Visor "Slide-On-Rod" Feature
The sun visor "Slide-On-Rod" feature allows for
additional flexibility in positioning the sun visor
to block out the sun.
1. Fold down the sun visor.
2. Unclip the visor from the center clip.
3. Pull the sun visor toward the inside rearview
mirror to extend it.
Hide quick links:
Advertisement
Table of Contents
