Exterior Lights; Multifunction Lever; Headlight Switch; High/Low Beam Switch - Jeep CHEROKEE 2020 Owner's Manual

EXTERIOR LIGHTS

M L
ULTIFUNCTION EVER
The multifunction lever controls the operation
of the turn signals, headlight beam selection
and passing lights. The multifunction lever is
located on the left side of the steering column.

Multifunction Lever

H S
EADLIGHT WITCH
The headlight switch is located on the left side
of the instrument panel. This switch controls the
operation of the headlights, parking lights,
automatic headlights (if equipped), instrument
panel lights, and fog lights (if equipped).

Headlight Switch

1 — Rotate Headlight Control
2 — Push Fog Light
3 — Ambient Light Dimmer Control
4 — Instrument Panel Dimmer Control
Rotate the headlight switch clockwise to the
first detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the second detent for headlight,
parking light and instrument panel light
operation.
GETTING TO KNOW YOUR VEHICLE
D R L (DRL
AYTIME UNNING IGHTS
E
QUIPPED
The Daytime Running Lights will turn on when
the engine is started and remain on unless the
headlamps are turned on, the parking brake is
applied, or the engine is cycled to OFF.
NOTE:
If allowed by law in the country in which the
vehicle was purchased, the Daytime Running
Lights can be turned on and off using the Ucon-
nect System, refer to "Uconnect Settings" in
"Multimedia" for further details.
H /L B S
IGH OW EAM WITCH
Push the multifunction lever, located on the left
side of the steering wheel, away from you to
switch the headlights to high beam. Pull the
multifunction lever toward you to switch the
headlights back to low beam.
47
) — I
S F
2