Jeep CHEROKEE 2020 Owner's Manual page 186

184 SAFETY
WARNING! (Continued)
If you are installing three child restraints

next to each other, you must use the seat
belt and the center tether anchor for the
center position. You must use the LATCH
anchors to install the child seat in position
(3), behind the driver. You may use either
the LATCH anchors or the vehicle's seat
belt for installing the child seat in position
(1), behind the front passenger. Please
refer to "Installing the LATCH-Compatible
Child Restraint System" for typical installa-
tion instructions.
Fixed 2nd Row Seat:
Do not install child restraints with rigid lower
attachments in the center seating position. Only
install this type of child restraint in the outboard
seating positions. Child restraints with flexible,
webbing mounted lower attachments can be
installed in any rear seating position.
Fixed Second Row Seat LATCH Positions
WARNING!
Never use the same lower anchorage to
attach more than one child restraint. If you
are installing LATCH-compatible child
restraints next to each other, you must use
the seat belt for the center position. You can
then use either the LATCH anchors or the
vehicle's seat belt for installing child seats in
the outboard positions. Please refer to
"Installing The LATCH-Compatible Child
Restraint System" for typical installation
instructions.
Always follow the directions of the child
restraint manufacturer when installing your
child restraint. Not all child restraint systems
will be installed as described here.
To Install A LATCH-Compatible Child
Restraint
If the selected seating position has a
Switchable Automatic Locking Retractor (ALR)
seat belt, stow the seat belt, following the
instructions below. See the section "Installing
Child Restraints Using the Vehicle Seat Belt" to
check what type of seat belt each seating
position has.
1. Loosen the adjusters on the lower straps
and on the tether strap of the child seat so
that you can more easily attach the hooks
or connectors to the vehicle anchorages.